Ultra Liquid L550 Water Insulation

FEATURES:

• High strength natural waterproofing material thanks to its special

components.

• Protects from the UV-A and UV-B harmful rays radiated by the Sun.

• Atmospheric pressure resistance is high.

• The protective feature does not dissolve over time.

• It does not create any cracking, breaking or casting.

• Resistant to hot and cold conditions (-30 to + 200 ° C) in climatic conditions.

• It is of a whitish appearance.

• With its flexible and elastic structure, it has a superior holding and

carrying feature which can be easily applied on any kind of surface.

• It is multi-purposed and economical.

• It is resistant to atmospheric pressure.

• It is long-lasting.

PROTECTION PERIOD:

Waiting time between coats may vary depending on air temperature,

surface temperature, air humidity and coating thickness. Waiting time

between coats is 23 ° C and 5-6 hours at 50% relative humidity. Care should

be taken to ensure that the lower coat is fully dry before applying the next

coat. After application, all tools and equipment should be washed immediately

with clean water.

AREAS OF USAGE:

• It can be applied to all areas exposed to water such as roof, concrete wall

in concrete, terrace, parapet, bath, wc, bath, pool and hot springs.

• Protect from water and fire when applied on membrane, wood, iron, laminate,

plastic and paper.

• It has the ability to be applied on moist and damp surfaces.

• Can be used on wet floors as preventive material.

• It has long bond life due to high bond strength.

• It is an isolation material that can be easily applied by everyone on the

flat and sloping roofs of the buildings, on the wide surface, very detailed

terraces and balconies, on the ditches, canals and canals, on the sides of

the chimneys, fringes, gutters and drains. Does not create joints, adapts

to any surface.

USAGE:

• The surface to be applied is cleaned by removing dust and dirt.

• After opening the bucket, it is mixed with the mixer for 1 min.

• It is applied 2 coats on the cleaned surface with a brush and a roller.

• Consumption is averagely (at least doubly) 900-1000 gr/m2.

• It can be painted after 24 hours if desired.